Repair Services / LED Module Repair / IC Repair

Integrated Circuit Repair

Expert IC Repair for LED Displays

Missing rows, dark columns, color channels out, or modules that won’t talk to the wall? One failed IC can take out an entire section. We diagnose it, replace it under the microscope, and bring the full module back.

★★★★★

“Jose and his team are proven professionals and masters of their craft.”Alex Viyar · Sheraton Los Angeles San Gabriel

IC Map · LED ModuleAll ICs OK
Tap any chip to see what failsScan IC = rowsDriver IC = columns

Driver & Scan IC Replacement

High-Powered Microscopes

Most Repairs Within 2 Weeks

Real-Time Status in 725tracko

The Brain of Your LED Module

How Do Integrated Circuits Factor Into LED Display Problems?

ICs control brightness, color, power, and the visual data on every module. When one fails, it doesn’t take out a single pixel — it takes out everything it controls.

DRV

Driver ICs

Control the current to LED columns and color channels, setting brightness and color for every pixel they serve.

When it failsDark columns, missing colors, or uneven brightness

SCAN

Scan & Row ICs

Switch the module’s rows on and off in sequence so every line of pixels refreshes correctly.

When it failsDark rows, horizontal bands, or ghosting lines

DATA

Data & Buffer ICs

Pass the video signal across the module and on to the next one in the chain.

When it failsScrambled content, blocks out, or no signal downstream

PWR

Power ICs

Regulate and distribute stable power across the module’s circuits and components.

When it failsDead module, flicker, or intermittent shutdowns

Read the Symptoms

Which IC Is Failing on Your Module?

The pattern on your screen usually points to the component behind it. Our diagnostics confirm the exact cause before any repair begins.

What you seeLikely causeHow we repair it
Vertical dark columnDriver ICDriver replacement and column verification
Horizontal dark row or bandScan ICScan IC replacement and refresh testing
One color missing in an areaDriver channelChannel-level diagnosis and driver repair
Scrambled content or blocks outData / buffer ICSignal tracing through the data path
Dead module or flickerPower ICPower section repair and load testing
725co engineer diagnosing integrated circuits on an LED module

Why Choose 725co for IC Repair

Only a Select Few Have the Precision for IC Repair

IC repair means working with tiny pins, tight spacing, and boards that don’t forgive mistakes. 725co is proud to be one of the few LED repair companies built for it.

Fast IC Repairs

Most IC repairs are completed within two weeks of receiving your module.

Expertly Trained Engineers

Trained in the latest integrated circuit repair techniques.

Precision Under the Microscope

High-powered microscopes for the smallest pins and components.

IC & PCB Expertise

We repair and reconstruct ICs on your PCB to avoid costly replacements.

Advanced Repair Tools

Custom soldering tips, flux, and copper wire for precise results.

Clear Status Updates

A color-coded tracking system keeps you updated in real time.

Our IC Repair Process

From Failed Chip to Fully Restored Module

1

Symptom Analysis

The failure pattern is mapped and logged at intake.

2

Signal Tracing

We trace data and power paths to the exact IC.

3

Safe IC Removal

Controlled removal that protects pads and nearby parts.

4

Precision Placement

New IC aligned pin by pin and soldered under the microscope.

5

Full-Function QC

Every row, column, and channel tested before return.

Verified Industry Testimonial

★★★★★

“Just had some Absen A2712 v2 modules repaired and couldn’t be happier. These guys are leaps and bounds above even the factory repairs I’ve had done.”
Chris Scott · Peppermill Casinos

For Qualified New Clients

Doubt Our Quality? Test Us. 5 Modules on Us.

We don’t hand out free repairs to everyone. But if you’re serious about working with 725co, we’ll repair 5 modules at no cost so you can experience our standard firsthand.

Related Repair Services

Complete Component-Level Support

FAQ

IC Repair FAQs

Common questions about integrated circuit (IC) repair for LED displays.

I have another question →

What is IC repair on an LED module?

IC repair is the diagnosis and replacement of failed integrated circuits — such as driver, scan, data, or power ICs — that control rows, columns, color channels, signal, and power on an LED module.

What is the difference between a driver IC and a scan IC?

Driver ICs control the current to columns and color channels, setting each pixel’s brightness and color. Scan ICs switch rows on and off in sequence. A failed driver usually shows as a dark column or missing color; a failed scan IC usually shows as a dark row or band.

How do I know if my LED module has a bad IC?

Common signs include full rows or columns going dark, missing colors in one area, scrambled or blocked content, flickering, or a module that won’t display at all. Our diagnostics confirm the exact cause before any repair begins.

How long does IC repair take?

Most integrated circuit repairs are completed within two weeks of receiving your module. If the specific IC needs to be sourced, the repair may take a little longer — we’ll keep you updated through every step.

Is IC repair worth it compared to replacing the module?

In most cases, yes. Replacing a single failed IC is typically far more cost-effective than replacing a full module, especially when replacement modules are expensive or hard to source.

Can a failed IC damage other parts of the module?

It can. Overheating or electrical surges that damage an IC may also affect nearby traces and pads. When that happens, the repair may include PCB reconstruction to restore the board.

Do you repair ICs on all LED brands?

We repair modules from leading manufacturers including Absen, INFiLED, ROE, Unilumin, QSTECH, AOTO, and more. Component availability for your specific module is confirmed during diagnostics.

Restore Every Row & Column

One Failed IC Shouldn’t Take Down Your Wall.

Tell us what your modules are showing. We’ll review your request and get back to you with next steps.

Garden Grove, CA

Las Vegas, NV

Serving Clients Nationwide

Portrait of José de Jesús “Chuy” Martínez, founder of 725co LED Repair Professionals

José de Jesús “Chuy” Martínez

Founder & CEO · 725co. LED Repair Professionals

José de Jesús “Chuy” Martínez is the founder and CEO of 725co. LED Repair Professionals, with more than two decades of hands-on electronics experience and over a decade specializing in professional LED display technology. His expertise reaches far beyond the repair bench, encompassing live-event production, LED video wall assembly, on-site technical support, and permanent display installations.

His technical foundation began in León, Guanajuato, Mexico, where he learned electronics alongside his father, an electronics repair technician. From repairing cassette players for classmates to developing advanced diagnostic skills on computers and electronic equipment, Chuy built a reputation for solving difficult technical problems. In 2008, he established his first business, 777 Computer Repair, specializing in hands-on troubleshooting and component-level repairs.

In 2012, an invitation from his friend Luis brought him into the professional LED industry through Matrix Visual. Working from the beginning as an independent contractor under LED REPAIR TECHS, Chuy developed extensive field experience traveling to major productions, assembling LED video walls, diagnosing technical issues, and repairing displays during live shows—often under the time-sensitive demands of an active event.

Throughout his career, he has contributed to events and productions involving major audiovisual companies, including PRG, 4Wall, and Freeman, as well as numerous other industry providers. A notable example was his work installing and repairing LED screens for the live performance featured in Kevin Hart: What Now?, the 2016 concert film. His background also includes extensive experience with permanent LED display installations, giving him a broad understanding of display systems from installation through maintenance and repair.

As his responsibilities at Matrix Visual expanded, Chuy took charge of its repair operation, personally recruiting, training, and directing a growing team of technicians. His first recruit was his brother David. He incorporated LED REPAIR TECHS INC in 2018 and opened a dedicated repair facility in Garden Grove, California, in 2021, building on the professional relationships and technical reputation he had established across the industry.

In 2022, he introduced 725co as the company’s DBA in memory of David, whose birthday was July 25. Today, Chuy combines deep technical knowledge, extensive production experience, and entrepreneurial leadership to guide 725co with a focus on precision, reliability, and professional repair standards—while carrying forward the family legacy behind its name.