Repair Services
Locations
Nationwide LED Module Repair
Dead pixels, missing lines, color issues, or damaged boards? We repair LED modules at the component level — with microscope-assisted precision, strict QC, and documented results — so your video wall comes back performing like it should.
★★★★★
“These guys are leaps and bounds above even the factory repairs I’ve had done.”Chris Scott · Peppermill Casinos
Start With the Symptom
Select the issue you’re seeing. We’ll show you what usually causes it — and exactly how our technicians repair it.
Likely cause
A failed LED chip, a cracked solder joint, or a damaged pad — often from impact, heat, or age.
How 725co fixes it
We replace individual LEDs under high-powered microscopes using controlled soldering, matching color and brightness so the repaired pixel blends in with the rest of the wall.
Likely cause
A failed driver IC or scan IC, or a broken trace interrupting the signal to an entire line of pixels.
How 725co fixes it
We trace the failure to the exact component, replace the damaged IC, and verify every connection so the full row or column is restored — not just patched.
Likely cause
A faulty color-channel driver, a damaged LED die, or mismatched parts from a previous repair.
How 725co fixes it
Channel-level diagnostics pinpoint the source. We replace the affected components with properly matched parts to bring color uniformity back across the module.
Likely cause
A failure in the data or power path — damaged connectors, buffer or receiving ICs, or a problem in the power section.
How 725co fixes it
We trace the signal and power path step by step and repair the failed components at board level, restoring stable communication across the module.
Likely cause
Drops and impact during load-in or shipping — cracked corners, burned areas, lifted pads, or broken traces.
How 725co fixes it
Our PCB reconstruction rebuilds damaged traces and pads to restore electrical continuity and structural integrity, even when the board itself is damaged.
Likely cause
Overheating from hot-air shortcuts, wrong replacement parts, or poor soldering that weakened the board.
How 725co fixes it
We correct prior repair damage, rebuild pads and traces where needed, and restore the module to professional standards — then QC it before it ships back.
Don’t Take Our Word for It
★★★★★
“Just had some Absen A2712 v2 modules repaired and couldn’t be happier. These guys are leaps and bounds above even the factory repairs I’ve had done.”Chris Scott · Peppermill Casinos
Why AV Professionals Trust 725co
Every LED module is repaired at the component level using proper diagnostics, microscope-assisted inspection, controlled soldering, and a strict QC process.
We diagnose the failure and repair at the board and pixel level — no blind part swapping.
High-powered microscopes for small pixels, ICs, solder joints, and delicate PCB areas.
Controlled techniques that protect the board instead of overheating and weakening it.
Dead pixels, driver ICs, lifted pads, broken traces, burned areas, and prior repair damage.
Every repair is tested and visually inspected before it’s approved to ship back.
Repair notes, QC review, and status tracking through 725tracko for full visibility.
Not All LED Repairs Are Equal
A module that lights up today isn’t the same as a module that’s repaired right. Here’s the difference between a quick fix and a professional LED module repair.
| What matters | 725co | Typical quick-fix repair |
|---|---|---|
| Repair method | Root-cause, component-level repair | Parts swapped until it lights up |
| Heat control | Controlled soldering techniques | Hot-air shortcuts that stress the board |
| Inspection | High-powered microscopes | Naked-eye inspection |
| Quality control | QC testing before every return | Returned as soon as it turns on |
| Visibility | Repair notes & tracking in 725tracko | No documentation |
| Industry backing | Manufacturer partnerships · BBB A+ | Unverified claims |
The result: fewer repeat failures and a longer life for your LED wall investment.
Our Repair Process
Every module is logged in our internal system from the moment it arrives — so you always know where your equipment is and what was done.
1
Modules are verified and logged in 725tracko on arrival.
2
Visual and electrical inspection to find the root cause.
3
Pixel, IC, and PCB work under the microscope.
4
Testing and inspection before approval for return.
5
Repair notes included so you know exactly what was done.
For Qualified New Clients
We don’t hand out free repairs to everyone. But if you’re serious about working with 725co, we’ll repair 5 modules at no cost so you can experience our standard firsthand before committing to a larger repair order.
Verified Industry Testimonials
Real companies. Real professionals in the LED display and entertainment industry. Real results.
★★★★★
“Their turnaround times are super quick and always with excellent repair quality. Chuy and his team are great at what they do and really care about their product service. We love these guys!”
Ernie MondacaSurface Productions
★★★★★
“We have two 33ft LED screens that Jose personally oversees and maintains. Jose and his team are proven professionals and masters of their craft.”
Alex ViyarSheraton Los Angeles San Gabriel
★★★★★
“We’re so happy with 725. They’ve done an outstanding job for us for over two years now, and their service is perfection to say the least.”
Tod P.North Georgia LED
Rated A+ for transparency, ethics, and customer trust.
Honored for excellence in LED module repair.
Award Recipient
Brands We Repair
LED screen repair, LED panel repair, pixel, IC, and PCB-level repair for the modules used across the AV, rental, installation, and production industries.
Ship-In or On-Site
Recommended
The fastest and most controlled process. Your modules get full diagnostics, repair, QC, and documentation in our facility.
When Shipping Isn’t an Option
725co may be able to travel to your location. Availability depends on schedule, location, module quantity, work conditions, and the type of repair required.
FAQ
Answers about our LED module repair process, IC repair, PCB reconstruction, video QC, and travel-based support.
725co repairs a wide range of LED module issues including dead pixels, stuck pixels, dim pixels, damaged ICs, scan line problems, communication issues, PCB damage, lifted pads, broken traces, burned areas, and previous repair damage. Each module is inspected and diagnosed before repair to determine the best solution.
Every LED module is documented in our internal repair system from the moment it is received. Our workflow includes intake verification, visual inspection, diagnostics, component-level repair, QC testing, repair notes, and final approval before the module is returned to the client.
Yes. 725co repairs both indoor and outdoor LED modules depending on the model, condition, pixel pitch, and type of damage. Outdoor modules may require additional inspection for weatherproofing, corrosion, silicone, or environmental damage before repair is approved.
IC repair focuses on diagnosing and replacing damaged driver ICs or related components that control rows, columns, color channels, scan lines, or module communication. These failures can cause missing sections, color issues, flickering, or abnormal display behavior.
PCB reconstruction is board-level repair for damaged traces, lifted pads, burned areas, cracked corners, broken solder joints, or previous repair damage. It restores electrical continuity and module function when the circuit board itself has been physically or electrically damaged.
Yes. Completed repairs can be supported with repair notes, inspection details, and video QC to help confirm module performance before return, giving you better visibility into what was repaired.
For the fastest and most controlled process, we recommend sending LED modules to our repair shop. If shipping or drop-off is not the best option, 725co may be able to travel to your location, depending on location, schedule, module quantity, work conditions, and the type of repair required.
725co specializes in professional, component-level LED module repair for AV companies, manufacturers, integrators, production teams, and LED wall owners. Our work is built around diagnostics, microscope-assisted precision, controlled soldering techniques, QC testing, documentation, and long-term reliability.
Ready When You Are
Tell us what you’re seeing and how many modules need attention. We’ll review your request and get back to you with next steps.
Garden Grove, CA
Las Vegas, NV
Serving Clients Nationwide
José de Jesús “Chuy” Martínez is the founder and CEO of 725co. LED Repair Professionals, with more than two decades of hands-on electronics experience and over a decade specializing in professional LED display technology. His expertise reaches far beyond the repair bench, encompassing live-event production, LED video wall assembly, on-site technical support, and permanent display installations.
His technical foundation began in León, Guanajuato, Mexico, where he learned electronics alongside his father, an electronics repair technician. From repairing cassette players for classmates to developing advanced diagnostic skills on computers and electronic equipment, Chuy built a reputation for solving difficult technical problems. In 2008, he established his first business, 777 Computer Repair, specializing in hands-on troubleshooting and component-level repairs.
In 2012, an invitation from his friend Luis brought him into the professional LED industry through Matrix Visual. Working from the beginning as an independent contractor under LED REPAIR TECHS, Chuy developed extensive field experience traveling to major productions, assembling LED video walls, diagnosing technical issues, and repairing displays during live shows—often under the time-sensitive demands of an active event.
Throughout his career, he has contributed to events and productions involving major audiovisual companies, including PRG, 4Wall, and Freeman, as well as numerous other industry providers. A notable example was his work installing and repairing LED screens for the live performance featured in Kevin Hart: What Now?, the 2016 concert film. His background also includes extensive experience with permanent LED display installations, giving him a broad understanding of display systems from installation through maintenance and repair.
As his responsibilities at Matrix Visual expanded, Chuy took charge of its repair operation, personally recruiting, training, and directing a growing team of technicians. His first recruit was his brother David. He incorporated LED REPAIR TECHS INC in 2018 and opened a dedicated repair facility in Garden Grove, California, in 2021, building on the professional relationships and technical reputation he had established across the industry.
In 2022, he introduced 725co as the company’s DBA in memory of David, whose birthday was July 25. Today, Chuy combines deep technical knowledge, extensive production experience, and entrepreneurial leadership to guide 725co with a focus on precision, reliability, and professional repair standards—while carrying forward the family legacy behind its name.
